Shenzhen Honreal Technology Co.,Ltd
We take "honor, honest, honey, real" as our corporate culture. The quality of the company's products is reliable, the company is honest and trustworthy, establishes a close cooperative relationship
Add to Cart
Smt Full Automatic DIP Lead Free Flux Spray Preheating Pcb Welding Selective Wave Solder
The Selective wave soldering is a special form of welding that are invented to meet the requirements of modern welding technology. Through pre-programmed procedures, the machine can specifically spray and weld the solder joints for that need spray flux, and not only the welding efficiency and reliability are higher than that of manual welding, but also the welding cost is lower than wave soldering.
The Selective wave soldering can be configured with one, two or three flux coating technology according to the specific requirements of the user’s operation, which can achieve accurate welding of solder joints and weld the solder joint particularly
| Machine name | SELPOT-400 | |
| General | ||
| dimension | L1520mm X W1650mm X H1650mm | |
| general power | 18kw | |
| consumption power | 5-7kw | |
| power supply | Three-phase 380V 50HZ | |
| net weight | 1200KG | |
| reuiqred air source | 0.4-0.6MPa | |
| required air flow | 8-12L/min | |
| required N2 pressure | 0.4-0.6MPa | |
| required N2 flow | more than 2cubic meter per hour | |
| required N2 purity | >99.998% | |
| required exhausting | 500--800CMB/H | |
| carrier or PCB | ||
| carrier | according product | |
| max carrier size | L400 x W400 mm | |
| PCB thickness | 0.2mm-----6mm | |
| pcb edge | 5mm or more | |
| controlling & conveyor | ||
| controlling | Industrial PC | |
| conveyor width | 100-400MM | |
| conveyor type | SUS roller | |
| conveyor thick | 2---6mm (edge thickness or carrier thickness) | |
| PCB conveyor direction | Left to right | |
| PCB conveyor up clearance | 100MM | |
| PCB conveyor bottom clearance | 30MM | |
| conveyor load | <10kg | |
| conveyor rail | Aluminum rail | |
| conveyor height | 900+/-30mm | |
| Motion table | ||
| motion axis | X, Y, Z | |
| motion control | Closed-loop servo control | |
| motion motor | Panasonic servo motor | |
| ball screw | Hiwin | |
| position accuracy | + / - 0.05 mm | |
| chassis | metal welding | |
| Flux management | ||
| flux nozzle | Japan Lumina | |
| nozzle durability | stainless steel | |
| flux tank capacity | 3L | |
| flux tank | pressure tank | |
| alcohol tank capacity | 1L | |
| alcohol tank | pressure tank | |
| Preheat | ||
| preheat method | upper IR heating | |
| heater’s power | 13.5kw | |
| temperature range | 25--240℃ | |
| solder pot | ||
| standard pot number | 1pcs | |
| solder pot capacity | 13 kgs / solder pot (Electromagnetic pump) | |
| solder temperature Control | PID | |
| melting time | 20--30 Minutes | |
| max solder temperature | 350 ℃ | |
| solder heater | 1.2kw | |
| solder nozzle | ||
| nozzle | customized | |
| material | high carbon alloy | |
| standard equipped nozzle | sdandard equipped 5pcs/ solder pot(the inside diameter of nozzle 2.5mm, 3mm, 4mm, 5mm,6mm ) | |
| N2 management | ||
| N2 heater | standard equipped | |
| ID N2 temp range | 0- 350 C | |
| N2 consumption | 2 m³ /h / nozzle | |
Details:
1.Minimum configuration
The processor is not less than 2.0GHz, internal storage is not less than 4GB, free disk space is not less than 16GB.
2.Recommend configuration
Processor quad-core 1.8GHz, internal storage 8G, disk space left 512GB, gigabit network card.
3.Screen resolution
1920 * 1080 (necessary)
Operating system:Win7 64 bit,Win10 64 bit